Soft shape and modern design
You don't need a ventilator, you pump once in a long time! :)
Roof? A wall with a window? Or maybe a connector between the tents?
In the table you will find detailed measurements of constant pressure tents.
| VENTO® 3x3 | VENTO® 4x4 | VENTO® 5x5 | VENTO® 6x6 | VENTO® SIX | |
|---|---|---|---|---|---|
| usable area [m2] | 7 | 15 | 22 | 30 | 17 |
| width of the tent [m] | 3 | 4 | 5 | 6 | 4 |
| the length of the tent [m] | 3 | 4 | 5 | 6 | 7 |
| external height [m] | 2,65 | 2,90 | 3,60 | 4,25 | 2,65 |
| internal height [m] | 2,40 | 2,65 | 3,30 | 3,90 | 2,40 |
| entrance width [m] | 2,75 | 3,70 | 4,50 | 5,20 | 2,75 |
| entrance height [m] | 2,00 | 2,20 | 2,50 | 2,80 | 2,00 |
| leg diameter [m] | 0,25 | 0,25 | 0,30 | 0,35 | 0,25 |
| unfolding time: electric pump [min] | 5 | 5 | 10 | 15 | 8 |
| unfolding time: hand pump [min] | 10 | 10 | 15 | 20 | 15 |
| weight of the tent without walls [kg] | 15 | 21 | 25 | 21 | |
| weight of the tent with a set of walls [kg] | 22 | 30 | 36 | 27 | |
| total weight of the tent* [kg] | 23,60 | 28 | 38 | 46 | 33 |
* set of walls + the necessary hardware for assembly
100% sublimation printing is 100% vivid color! You can arrange your graphics throughout the tent, get carried away by your imagination!
Use the fabric color palette if you don't want to print the legs of the tent.
The VENTO® tent consists of a set of gas-tight modules that form the frame of the tent and a printed cover (optionally, you can choose a removable cover). For each tent in the set you will receive the necessary assembly kit, and all this will be packed in a convenient transport cover.
of straight pegs
of screw pegs with guy lines
assembly hammer
two-stroke hand pump
telescopic pole for fastening the walls
transport cover
*The telescopic pole is included in the basic equipment of VENTO tents 5 x 5 m and 6 x 6 m. Smaller tents do not require a pole.
